2025 Exmark LRE801GKA524A3 52″ Kawasaki® FX801V
$12,145.00
Discover the Exmark Lazer Z E-Series Mower
As the most affordable model in the Lazer Z line, the all-new 2025 Lazer Z E-Series delivers an unbeatable combination of cut quality, productivity, durability and value. Select from 48-, 52-, or 60-inch UltraCut Series 4 cutting decks, all equipped with a newly redesigned discharge chute that distributes clippings over a wider area. A choice of twin-cylinder Kawasaki, Kohler, or Vanguard twin-cylinder commercial engines are available, all equipped with heavy-duty external air filters. Power is delivered through unitized Hydro Gear pump and motor units for up to 11 mph forward ground speeds. A new full-suspension operator seat increases operator comfort during long work days.
- Unibody Frame: The Lazer Z E-Series Utilize A One-Piece Unibody Frame That Delivers Increased Durability With Fewer Parts –– A Classic Case Of “Less Is More”.
- Less Time At The Pump: Lazer Z E-Series Models Feature A Single 9.5-Gallon Fuel Tank With A Single Fill Location.
- Ultracut Series 4 Deck: Built From Formed And Welded High-Strength Steel, Ultracut Series 4 Full-Floating Decks Feature Maintenance Free Spindles With Splined Blade Drivers To Stop Bolt Tightening On Impacts. The Idler Arm Pivot Bearings Are Also Maintenance Free.
- Tool-Less Belt Removal: The Deck And Hydro Belts Can Be Installed And Removed Without Tools.
- Reduced Maintenance: With Just Two Annual Grease Points And Maintenance-Free Sealed Bearing Spindles, The Lazer Z E-Series Delivers Maximum Performance With Minimum Maintenance.
- Upc: 193308242217
- Width / Cutting Deck: 52"
- Drive: Hydro-Drive
- Starter: Electric
- Steering Control: Hydraulically Dampened Twin Levers Adjustable Both Fore And Aft. Also Has 2-Position Height Adjustment.
- Caster Forks: .50" Thick Caster Yoke Arms.
- Front Caster Tires: 13 x 6.5-6, smooth tread, pneumatic. Sealed ball bearings.
- Drive Tires: 24 X 9.5-12, 4 Ply Super Turf Tl
- Safety Package: Operator Presence Controls (Opc) And Drive System Interlock, With Safety Interlock System Indicators.
- Parking Brake: Lever Actuated Internal Wet Disc Brake
- Tractor Frame: Unibody, Welded, Heavy-Duty 1.5" X 3" Tubular Steel.
- Blade Spindles: No Maintenance, Sealed And Non-Greasable Spindles; 7.75"-Diameter Cutter Housing With 25Mm (.98") Diameter Spindle Shaft And Splined Blade Driver.
- Electrical: 12-Volt Battery With 15-Amp Alternator.
- Standard Features: Engine Hour Meter And Cup Holder
- Seat: Deluxe suspension seat, foam flip-up armrests, and integral safety switch. Adjustment: Fore and aft from operator's position.
- Transmission Speeds: Infinitely Variable
- Engine Brand: Kawasaki®
- Engine Model: Fx801V
- Engine Displacement: 852Cc
- Engine Series: V-Twin
- Fuel System: Carbureted
- Speed: Infinitely variable speed selection from 0–11.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
- Engine Speed: 3750 Rpm
- Engine Spec: Fx801-As31-R
- Air Filter: Heavy-Duty Canister Air Filtration System
- Fuel Capacity: 9.5-Gallon Single Fuel Tank With Single Fill Location
- Drive Description: Dual Hydro-Gear Zt-4400, Hydrostatic Transmission With Charge Pumps, Relief Valves And Independent, Replaceable Filters.
- Pto Engagement: Magstop Electromagnetic 175 Ft-Lb Clutch With Spot Brake
- Fuel Type: Gas Carbureted
- Fuel Indicator: Mechanical float
- Drive Wheel Release: Allows unit movement without engine running.
- Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
- Carb Compliant: No
- Rops: 2-Post Foldable Rops Standard With Seat Belt And Latch.
- Deck Style: Floating Deck
- Deck Style Description: Full-Floating Ultracut Series 4. Side Discharge Standard, With Molded Discharge Chute And Option To Bag Or Mulch.
- Deck Construction: 10-Gauge High Strength Alloy Top That Is Formed And Continuously Seam Welded, With 7-Gauge Side Skirt, And 7-Gauge Reinforcement Plate Welded To Spindle Mounting Locations For Improved Strength.
- Cutting Heights: 1.5" To 5.5" In 0.25" Increments
- Blade Tip Speed: Approximately 18,500 Fpm
- Blades: 3 Blades At 18.00" Length
- Width: 64.7"
- Height: 70.1"
- Curb Weight: 1037
- Length: 84.6"
Additional information
| ENGINE | Engine Manufacturer Kawasaki® Horse Power 25.5 HP Engine Type FX801V Displacement 852 cc |
|---|---|
| GENERAL | Transmission Infinitely Variable Fuel Capacity 9.5 gal. |
| DECK | Discharge Type Side Discharge |
